Optical Protection Switch
FRM220-OPS51 FRM220-OPS52
Fiber Optical Protection Switch
The FRM220-OPS Series are able to provide fiber path redundancy on a channel by channel basis. These units are particularly well suited for protection in any type of fiber data transmission, including CWDM & DWDM links. The OPS52 includes monitoring capabilities for both the working and protected path fibers. In case of a fiber cut in the active path, traffic will be switched over to the protected path in less than 50ms (FRM220-OPS51) or 20ms (FRM220-OPS52). Monitoring is available through SNMP Management when both card is placed in FRM220 rack with SNMP management. The management can view the converter card's status, type, version, fiber link status and alarms. The card can be configured to enable or disable the port, reset the port, and configure receive threshold levels for path switching.
Features
- Latch feature, if power is lost the switch remains in its current state
- Protection transition < 50 ms (FRM220-OPS51)
- Protection transition < 20 ms (FRM220-OPS52)
- Works with any combination of 1 ~16 wavelengths
- Traffic is switched in one of three modes : revertive, non-revertive, manual (OPS52) or non-revertive, manual (OPS51)
- Programmable Rx threshold setting for switch-over
- Optical Interface Type : LC connectors
- Working and protected lines are physically separated fiber
- Supports auto-switching delay time can be set in auto-switch mode.
Application
- Download
- Related Products
Optical Protection Switch
FRM220-OPS51M
The FRM220-OPS51M is a Multi-mode Fiber Optical Protection Switch that is able to provide Multi-mode...
細節 添加到詢問車
主向位 Optical Protection Switch服務簡介
主向位科技股份有限公司是台灣一家擁有超過30年經驗的專業Optical Protection Switch生產專業製造商。 我們成立於西元1993年, 在數據營運、企業通訊產品、工業通訊產品應用領域上, 主向位提供專業高品質的Optical Protection Switch製造服務, 主向位 總是可以達成客戶各種品質要求。