When the FRM220-DS3 / E3 card is used standalone in a single slot chassis, DIP switches may be used for configuration and loopback control. When placed in a single slot chassis with console port, an easy to maneuver user menu is available via terminal to configure, monitor, and run diagnostic loop back functions. The EOC (embedded operations channel) allows in-band management to control the remotely connected modem over a working fiber link. When the FRM220-DS3 / E3 card is placed in the FRM220 rack with NMC management, the administrator can configure and view the local and remote converter cards' status, type, version, fiber link status and alarms.

Features

• In-band network Managed via Terminal, web or SNMP in FRM220 chassis
• DS3/E3 Coax (BNC) to Fiber SFP fiber modem
• Supports AIS (Alarm Indication Signal)
• User selectable E3 or DS3 setting
• Electrical and optical Loop back tests
• Standalone RS232 console management via CH01M

Download

FRM220-DS3_E3.pdf

下載

Related Products

E1/T1 Over Fiber Card

FRM220-E1/T1 & FRM220-E1/T1-SFP

The fiber media transport for G.703 E1/T1 transmissions (FRM220-E1/T1) is designed for point-to-point...

細節 添加到詢問車

RS232/530/V35 over Fiber Card

FRM220-DATA & FRM220-DATA-SFP

The FRM220-DATA is a fiber modem for high-speed (up to 8.192Mbps) synchronous or low speed...

細節 添加到詢問車

RS232/485 Over Fiber Card

FRM220-Serial & FRM220-Serial-SFP

The RS232/485 over Fiber Card (FRM220-Serial) provides a fiber modem solution to extend asynchronous...

細節 添加到詢問車