New 10G Base-T to 10G Base-R SFP+ Media Converter

10G Base-T to 10G Base-R SFP+ Media Converter


The FRM220-10GC-TS is a copper to fiber 10G Ethernet media converter based on IEEE802.3an and IEEE802.3ae. With SNMP and Web-based management in the FRM220, the Network administrator can monitor, configure and control the activity of each card in the chassis. This converter uses Cat.6a/Cat 7 twisted pair cable as copper transmission media with RJ-45 and 10G optical solution with SFP+ LC connector. The data stream can be converted bi-directionally from 10G Base-T to 10G Base-R and vice versa. With full duplex wire speed forwarding capability between these two media, the FRM220-10GC-TS brings you the best and simplest solution for the 10G Ethernet conversion between copper wire and fiber.


  • Network Management via FRM220 Chassis
  • Complies with IEEE802.3an 10GBase-T and IEEE802.3ae 10GBase-R
  • Real-Time conversion between 10GBase-T and 10GBase-R
  • Common used SFP+ fiber interface and RJ45 connector
  • Full duplex wire speed forwarding
  • Forwarding l8k bytes jumbo packet
  • Loopback Test
  • Link Fault Pass Through
  • Fiber Fault Alert
  • IEEE 802.1q VLAN pass through
  • Supports manual Dip Switch for quick set up

  PDF Download      Where To Buy

Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
Tel : +886-2-2659-1021
Email :